Many people think that if the iron starts leaking brown water or doesn't release steam well, it's time to change it. In fact, the problem is not a breakdown, but scale, and you can get rid of it in 10 minutes. You will need simple ingredients.
Take 100 grams of white vinegar or 1 teaspoon of citric acid and mix with 200 ml of water. Pour the solution into the iron reservoir. Turn on the steam mode and let the iron work for 5-7 minutes, the steam will push all the scale out of the holes. Then drain the residue and rinse the tank with clean water 2-3 times.
If there are burnt marks on the sole, sprinkle a little baking soda on a piece of paper, lightly moisten it with water and iron the mixture with a warm iron. After a minute, wipe with a damp cloth and the sole will become shiny, like new.
After the first cleaning, the iron will begin to produce even steam, and there will be no yellow spots on the clothes. Do this once every 1-2 months, and your iron will last twice as long, without brown smudges or a burning smell.
Thanks to this life hack, you will no longer be afraid to iron white shirts and delicate fabrics. Because now your iron works cleanly, smoothly and without surprises.
Question and answer:
How to descale an iron at home?
Mix 100 g of white vinegar with 200 ml of water, pour into the tank, turn on the steam for 5-7 minutes, then rinse with clean water 2-3 times. The scale will dissolve and the steam holes will be cleared.
How to remove burnt stains from the soleplate of an iron?
Pour baking soda onto a piece of paper, lightly moisten it with water, iron the mixture with a warm iron for 1-2 minutes, then wipe with a damp cloth. The stains will disappear without scratching.
Is it possible to clean a ceramic iron with baking soda?
No. Baking soda can scratch delicate finishes. For ceramics and Teflon, it is better to use only a soft cloth with soapy water or diluted vinegar.
