Over time, even a reliable washing machine begins to rinse worse, leaves scale on things, makes noise when spinning and smells musty. The reason is not a breakdown, but the accumulation of detergent residues, scale, lint and germs in the powder tray, cuff, filter and drum.
This reduces washing efficiency, causes vibration and can lead to corrosion of parts. But you can return your car to a “second life” without calling a technician or expensive means.
Here's a simple maintenance that only takes 20 minutes once a month and your washer will work like new again.
You will need:
- Vinegar or citric acid
- Cotton rag
- Old toothbrush
- Clean warm water
What to do:
- Disconnect the machine from the network and water.
- Remove the powder and rinse aid tray.
- Rinse it under warm water, scrub with a brush, remove plaque and remaining gel.
- Wipe the rubber door seal. Moisture, lint and mold often accumulate under it. Use a rag with vinegar, then dry.
- Clean the drain filter. It is usually located at the bottom front. Carefully unscrew the lid, place the container, remove the filter, remove hair and coins, and rinse.
- Run a “idle” wash. Pour 100 g of citric acid into the drum or pour 200 ml of vinegar. Start the program at 60°C without any items. This will dissolve the scale and kill bacteria.
After washing, leave the door and tray ajar for ventilation. Clean with citric acid once a month.
After such cleaning, you will notice that the drum spins more quietly, the laundry smells fresh and not musty, the machine does not “jump” during the spin cycle, and the clothes are clean even without double rinsing.
